Often preserving your lift is the important to reputable service. Planned preventative upkeep promptly diagnoses potential issues reducing the amount of time your lift is out of action. The objective of obtaining a planned maintenance schedule is to ensure a systematic check of the whole lift is completed. Dependant on your maintenance contract, the schedule and frequencies of checks will modify but you ought to count on the following by the service engineer on just about every take a look at you get.
- Run the lift checking how it begins and stops at every single floor.
- Verify operation of all (doors or gates) and test any reversal device fitted.
- Check all alarms or auto dialler's for appropriate operation.
- Lubricate guides and running gear if necessary.
- Verify oil levels.
- Then full the scheduled checks essential in that planned check out.
- Report any items requiring focus.
Your upkeep program must contain typical checks to the following areas:
- Landing Doors
- Shaft gear
- Floor Selector
- Handle Circuits
- Driving Mechanisms
- Brake unit
- Major sheave
- Secondary diverters
- Over speed devices
- Safety gear examination
- Wiring
- Safety devices
- Ropes
- Sundry Items
Lift wire ropes are produced up of a number of strands (typically eight in the lift industry) which are twisted about core created of hemp fibres this core keeps the ropes versatile. Each and every strand is in turn produced up of 19 or more person wires twisted with each other. These wires are created of specific steel which combine lightness with strength. The chief element in finally condemning a rope is the number of broken wires in a offered length. Nonetheless rusting, corrosion, excessive flattening of strands and the sudden stretching of a rope that has been in service for a whilst ought to also be regarded as. When ropes are reported as needing focus safety really should be the major concern as they are one of the key elements of a lift.
Sundry Things include things like items like Rope anchorages, Travelling cables, Indicators, Test units, Limit switches, Buffer switches.
Hydraulic Lifts
When the majority of lift equipment is comparable to all forms and makes of lifts, there are some variations which need to be checked in the addition to the above when servicing a hydraulic lift.
- Verify that the low stress switch operates correctly
- Test and verify emergency lowering device
- Verify the hyraulic oil level in the tank
- Test that the re-levelling device operates
- Verify all pipes for leaks
- Check ram cylinder
- Verify ram seals for leaks
- Check ram head
If all these items are checked on a normal basis you need to notice an enhanced performance of your lift and reduced breakdowns.
No comments:
Post a Comment